1. Turn the antenna 90 degrees sideways to avoid damaging it. Unbuckle the roof of your Birdfy Feeder and lift it up until it detaches.
2. Remove the perch by unscrewing the perch screw in a counter-clockwise direction. If you have the Hummee extension attached, unclip the buckles on both ends of the Hummee extension and pull it out.
3. Find the screw for the feeding tray at the back of the feeder body, just below the charging port. Unscrew it in a counter-clockwise direction and take off the feeding tray.
4. Clean the roof, perch, and feeding tray in a bucket with a brush and soapy water.
5. Use a long-handled brush to scrub the inside of the bird seed bin. Make sure that the silicone covers on the charging ports are securely sealed to prevent water from getting into the camera.
6. Dry your Birdfy Feeder thoroughly before reassembling and using it.
Please email support@birdfy.com if you have any questions.