1. Use the provided drill template to mark the locations of the holes, then use an electric drill (15/64", 6mm) to drill two holes;
2. Drive the provided plastic anchors into the holes. Skip this step if you are mounting on wood. Then drive in the mounting screws;
3. Install the mounting bracket onto your wall using the screws provided. Make sure it is level and secure.
4. Finally, slide the Birdfy Feeder into the bracket through the slide rail.

1. Wrap the mounting bracket around the tree with the provided Velcro strap.
2. Slide the Birdfy Feeder into the bracket through the slide rail.

1. Before beginning, ensure that the mounting bracket is not installed on the bottom of the Birdfy Feeder. If it is, use the pull tab on the bracket to remove it from the feeder.
2. Slide the tripod adapter into the Birdfy Feeder.
3. Install the Birdfy Feeder onto a tripod (not included) using the tripod adapter. Make sure that the feeder is securely attached to the tripod and stable before use.

1. Loosen the provided hose clip by turning the handle counterclockwise.
2. Align the mounting bracket with the pole and wrap the hose clip around both the bracket and the pole. Make sure the bracket is level and secure.
3. Tighten the hose clip by turning the handle clockwise until it is snugly in place.
4. Slide the Birdfy Feeder into the bracket through the slide rail.

Please email support@birdfy.com if you have any questions.