Mounting Your Birdfy Nest on a Wall
-
Use the provided drill template to mark the locations of the holes, then use an electric drill (15/64", 6mm) to drill four holes.
-
Install the hanging bracket on the wall using the screws.
-
Align the mounting bracket on the back of the birdhouse with the hanging bracket, then hang the birdhouse securely on the wall.
Strapping Your Birdfy Nest to a Tree
-
Wrap the strap around a tree trunk. Fasten it by threading the end of the strap through the buckle.
-
Make sure the lever on the buckle is facing upwards and that the strap goes through the buckle from the bottom to the top.
-
Align the mounting bracket with the hanging bracket and hang the birdhouse on the tree.
Mounting Your Birdfy Nest on a Pole
-
Loosen the provided hose clip by turning the handle counterclockwise.
-
Wrap the hose clip around the hanging bracket.
-
Attach the bracket to the pole by tightening the hose clip.
-
Hang your Birdfy Nest on the hanging bracket.
Please email support@birdfy.com if you have any questions.